Verkaufsgesellschaft FIT2-40, Installation And Operating Instructions Manual

Page: 9 / 136

9 07.2007 TR20A012-B RE
1 General Information
The FIT2 radio-controlled internal push-button unit is a 2-channel trans-
mitter for operating two garage doors. The radio codes are transmitted
via the press-to-transmit buttons or via a separately connectable key
switch. The function of the key switch can be deactivated.
2 Installation
• Mount the radio-controlled internal push-button unit as shown in
figure 1/2.
• Make sure that the battery (figure 6) is inserted.
3 Connection / Operation
• Key switch
Connect the key switch as shown in figure 4. In the process, input E1
corresponds to the top press-to-transmit button 1 and input E2 to
the bottom press-to-transmit button 2. In this way 2 garage doors
can be opened and closed by impulse control. This function can be
deactivated by shifting the switch to the 0 position. In doing so, the
function of the press-to-transmit buttons is retained.
• Receiver
Program the existing receivers in accordance with the corresponding
installation instructions for the press-to-transmit buttons of the FIT2
radio-controlled internal push-button unit.
• Radio-controlled internal push-button unit
Each time press-to-transmit buttons 1 or 2 are pressed, the red
LED lights up.
ENGLISH