69
AG-7.2.B1-092414 • Restricted - customer use only
Figure: Create a Probe Group
To add Probes to a Probe Group select the desired Group (in this example the new TestGroup we just
created) and press the
<Add> Icon at the top of the page. Enter the IP address of the Probe in the
right hand pane and press
<Save> at the bottom of the page. Do this for each Probe you want to add
to the Probe Group.
The
Profile entry is a planned future feature intended to simplify management of multiple Probes.
Note: A Probe may only be associated with a single Probe Group.
Figure: Assign Probe to a Probe Group
11.2.2
Rename a Probe Group
This lets you rename the
Group. Select the group you want to rename and press the <Rename> icon
at the top of the dashboard. A new dialog box will appear. Enter the new name and press <
OK> to
effect the change, or
<Cancel> to keep the existing name. A message indicating the change was
completed momentarily appears at the top of the screen.
