109
AG-7.2.B1-092414 • Restricted - customer use only
Host:
URL or IP of destination where the trap is to be sent. Set to
localhost if all requests originate on the same machine as CS.
Port
Enter the port used for SNMP traffic with the host. Well-
Known SNMP is port 162.
Groups
List of Active Directory Groups.
Table: SNMP Receiver Settings
11.3.2.1
Add/Edit SNMP Receiver Settings
To create a new SNMP Receiver, click the
<Add> button at the top of the page. To edit an existing
Receiver, hover over the Receiver name and right click on the
<Edit> icon on the right hand side.
Enter the appropriate values and press
<Save>.
Figure: Add New SNMP Receiver Window
11.3.3
Settings - Channel Set
This page is used to define channel sets. Using channel sets enables the administrator to create a
logical channel grouping independent of which probes the specific Encoder is located. If Channel Sets
are not used individual Encoders are displayed under their associated Probe.
11.3.3.1
Add/Edit Channel Set
To add a
Channel Set click the <Add New Channel Set> icon at the top of the page. If your system
has a large number of
Encoders, use the Encoder Filter field to restrict which encoders are
displayed. To edit an existing
Channel Set, hover over the Channel Set and click the <Edit> icon.
Enter or change the name of the
Channel Set and select the desired Encoders. Press <Save> when
you are finished.
Example: Let’s say we have “AJN” set which includes 4 Encoders from Probe DEMO-TS and 6
Encoders from Probe WIN7. The number of Encoders assigned to a specific Channel Set is displayed
in parenthesis to the right of the Set name.