background image

476

Managing Geo-Fences

A geo-fence allows you to define a location that is of interest to you and create a boundary 

around it. When your vehicle crosses the boundary to enter or exit that location, an alert will  

occur and can be viewed on the Delphi Connect app or the website. You can also be notified via 

an email or text message if desired. See Configuring Notifications on page 75 for more  

information. You can define up to six geo-fences for each vehicle. These can be edited or 

deleted as often as you like. A geo-fence can be made as small as 0.01 miles, about 50 feet, or 

as large as you would like. Due to GPS location tolerance, it is suggested to make a geo-fence at 

least 0.1 miles in any direction to avoid false alerts.

Create a Geo-Fence Using the Map

1. Click the Geo Fence button in the Location view to begin managing Geo-Fences

Summary of Contents for Delphi Connect 4G LTE ACT233L





























































































































































































































































































































































































































































































































































































































Reviews: