background image

231

Personal PIN-Code

For added security, you can create a personal PIN-code. Once created, the PIN must be entered 

each time you access the app except when logging in to the app. That is, you will be required to 

enter the PIN whenever you return to the app from using a different feature of your phone.

If someone enters an incorrect PIN 5 times in a row, the app will be logged out and you will need 

to log in the next time you access the app.

Enable Personal PIN-Code

On the side menu tap Settings, then PIN-code.

Summary of Contents for Delphi Connect 4G LTE ACT233L





























































































































































































































































































































































































































































































































































































































Reviews: