75
Custom Applications
Port Forwarding Custom Applications allow you to define your own applications. Once defined,
these applications can be turned on and off in the same way as pre-defined applications. To define
an application, you need to know the ports and protocol (TCP, UDP) used by the application for
incoming traffic.
To add/delete Port Forwarding Custom Applications:
➊
Click Add a Custom Application.
➋
Enter a suitable name for the application you are adding.
➌
Enter the beginning and end of the port range for each application. Each application has its
own port range.
•
For a single port, enter the port number in both the Start Port and End Port fields.
•
For a port range, enter the beginning of the range in the Start Port field and the end of
the range in the End Port field.
➍
For each port range, select the protocol (TCP or UDP) used by that port range from the
Protocol dropdown menu.
➎
Enter the IP address of the connected device which will receive this traffic.
➏
To remove a Port Filterting Custom Application, check the Delete checkbox for that
application.
➐
Click Save Changes.
