Verizon Wireless MIFI MiFi 2200, User Manual

Page: 43 / 77

38
The Connected Devices section shows the following information for each device connected to the
network.
•
IP Address
— The IP address for the connected device.
•
IP Type
— This can be DHCP if the IP address came from the MiFi 2200 device, or ARP if the ARP
protocol was used.
•
Hostname
— The network name for the connected device (if available).
•
MAC Address
— The MAC address for the connected device.
NOTE
The MAC address on the Windows operating system is called the
Physical Address
.
Date/Time
— The date/time the device was detected by the network.
Buttons
The Refresh button re-loads the LAN screen to show changes to the list of connected devices, such as
a device that recently joined or left the network.
The Apply button applies any changes you made to the MiFi 2200 device’s IP address or subnet mask.
IMPORTANT
Changing the MiFi 2200 device’s IP address ends all Wi-Fi connections to the
MiFi 2200 device, including the current connection to MiFi Settings. You must re-connect your
computer to the MiFi 2200 device using the new IP address.
Be sure to write down the new IP address before you finish changing the profile.