Verizon Wireless MIFI MiFi 2200 User Manual Download

Page: 29 / 77

Mobile Broadband with USB Cable Mode

If you chose to connect the device to your computer with the USB cable, you can use the MiFi 2200
device as a USB modem to connect your computer to the mobile broadband network.

Connect the device to a computer

➊

Connect the device to your computer’s USB port with the included microUSB cable.
See

Connect the Device to the Computer with the USB Cable

on page 17.

➊

➋

Turn on the device so both LEDs are lit and green. Although the device is powered on, it
does not automatically connect to the Internet.

➊

➌

If sound effects are enabled, the computer might beep.

Connect To and Disconnect From the Network

➊

Open an Internet Browser window.

➊

➋

Log on to MiFi Settings. See

Configuring MiFi Settings

on page 27.

➊

➌

Connect to the network using MiFi Settings.

Summary of Contents for MIFI MiFi 2200














































































Search results

Summary of Contents for MIFI MiFi 2200

Reviews:

Related manuals for MIFI MiFi 2200

Brands by name

Popular brands

Verizon Wireless MIFI MiFi 2200, User Manual

Search results

Summary of Contents for MIFI MiFi 2200

Reviews:

Related manuals for MIFI MiFi 2200

Brands by name

Popular brands