![Veripart VPKVC701 Instructions Manual Download Page 64](http://html1.mh-extra.com/html/veripart/vpkvc701/vpkvc701_instructions-manual_1004518064.webp)
63
Breakdown
Cause
Solution
The appliance
no longer
works
There is an interruption
in the power supply.
- check that the plug is properly inserted in the
socket
- check that the power cable is not damaged
- check that there is voltage on the socket by
connecting a different appliance, such as a
night lamp
- check that the appliance is on by setting the
thermostat higher than 0
The interior
lighting does
not work.
The lamp is defective or
the plug is not in
the socket.
Check the solutions above or have the
lamp replaced.
Temperature
in the
refrigerator
is too high or
too low
Wrong setting of
the thermostat.
Turn the thermostat to a different position
The ambient temperature
is higher or lower
than the temperature
indicated in the table
with technical data
The appliance is intended for operation in an
ambient temperature indicated in the table with
technical data supplied with the appliance.
The appliance is located
in direct sunlight or near
a heat source.
Change the location of the appliance according to
the information in the instruction manual.
A too large amount
of hot food has been
placed in the appliance
at once.
Wait 72 hours until the products are frozen. The
temperature in the appliance will return to the
required level.
The ventilation at the
rear of the appliance is
hindered.
Keep the appliance 10 cm away from the walls, for
sufficient ventilation.
The door of the
refrigerator is opened
too frequently or remains
open for too long.
Open the door less often and/or reduce the time
that the door remains open.
The door is not closed
properly.
Make sure the foods are placed in such a way that
they do not hinder the door when it is being closed.
TROUBLESHOOTING