48
The doors of the appliance can be opened on the right or left side. In order to
reverse the door openings, please observe the instructions below. It would be
best to do this with two people.
1. Use a putty knife or thin-blade screwdriver to remove the screw hole
cap (left)
a
, then remove the upper hinge cover (right)
b
.
2. Unscrew the special self-tapping screws a and remove the
upper hinge.
Remark:
During this step, hold the upper door with your hand to
prevent it from falling.
3. Remove the upper hinge axis, transfer it to the reversed side and
tighten securely. Put it down for late use.
4. Remove the upper door from the middle hinge by carefully lifting the
door straight up.
Remark:
when removing the door, watch for the washer(s) between
the center hinge and the bottom of the upper door that may stick to the
door. Do not loose.
5. Place the upper door on a smooth surface with its panel upwards.
Loosen screw
a
and remove the stop block
b
.
6. Install these 2 parts
a
and
b
to the left side and tighten securely.
7. Unscrew the two special self-tapping screws which are used for fixing
the middle hinge part, then remove the middle hinge part that hold the
lower door in place.
Remark:
when removing the door, watch for the washer(s) between
the center hinge and the bottom of the upper door that may stick to the
door. Do not loose.
8. Place the lower door on a smooth surface with its panel upwards.
Loosen the screw
a
and remove the stop block
b
.
9. Install these 2 parts
a
and
b
to the left side and tighten securely.
10. Change the screw hole caps on the middle cover plate from the left
REVERSING THE DOOR OPENINGS
Attention!
• Switch off the thermostat and remove the plug from the socket.
Remove all items from the refrigerator, including the shelves and
drawers, before reversing the door opening.
