Verint Nextiva S1900e Series, User Manual

Page: 45 / 79

Verint Video Solutions 35
Nextiva S1900e Series User Guide
„
Display Option—Information displayed in the bottom left corner of the quadrant or
monitor. Possible values are:
†
Nothing
†
Date/time
†
Uptime
„
Show Transmitter Name—To show or hide the name of the associated transmitter above
the display option, in the bottom left corner of the quadrant or monitor. You provide the
name to display in the Transmitter Name parameter.
„
Transmitter Name—The name of the transmitter to be displayed when Show Transmitter
Name is enabled.
„
Opacity—The level of opacity of the information displayed over the video. A value of 0
indicates that the information is totally transparent (it is not showing); a value of 255
means that the data covers completely the video.
HTTP (Webserver)
A series of configuration parameters are relative to the web interface itself:
Note: If you change any of these parameters, you must refresh the web page (for instance,
by pressing F5).
„
HTTP Server IP Port—The port number of the HTTP Server.
„
Web Streaming Method—The protocol used for transmitting video.
„
HTTP Audio Streaming—To enable or disable the transmission of audio data.
If you enable audio streaming on your computer, you may experience a click every
10 seconds. To stop it, remove the sound with a Control Panel utility: Open Sounds and
Multimedia; in the Sounds tab, locate the Windows Explorer category, then select Start
Navigation; change its sound to (None).
„
HTTP PTZ Controls—To enable or disable the transmission of PTZ data.