DIDCSU E1 Version
4-28
Verilink DIDCSU 2912 User Manual
Each circuit must include a minimum of one network port (circuits
are not supported from data port to data port).
Figure 4-20 Circuit Example
The port line code selection (for example, 56 kbit/s or 64 kbit/s
circuits) can limit a circuit’s configuration.
NOTE:
Network and data ports must be
In Service
before being built
into a circuit.
When you have named a circuit and identified its source and
destination ports, allocate its source and destination timeslots.
NOTE:
You can cross-connect DIDCSU circuits across the AS2000
backplane to other DIDCSU modules. However, an NCM 2000
module is required. Refer to the NCM 2000 User Manual for
more information on this feature.
Figure 4-21 Circuit Build Configuration Menu
Net 1
Data 1
Net 2
Data 2
A
B
A. Data to E1
B. E1 to E1
Circuit Manager -- [1,1] NCM 2000 Firmware 5.04 --
Circuit Manager -- [1,1] NCM 2000 Firmware 5.04 --
Circuit Manager -- [1,1] NCM 2000 Firmware 5.04 --
Circuit Manager -- [1,1] NCM 2000 Firmware 5.04 --
>>>>>> NO CIRCUIT FOUND IN DATABASE <<<<<
>>>>>> NO CIRCUIT FOUND IN DATABASE <<<<<
>>>>>> NO CIRCUIT FOUND IN DATABASE <<<<<
>>>>>> NO CIRCUIT FOUND IN DATABASE <<<<<
A) add circuit L) search circuit
A) add circuit L) search circuit
A) add circuit L) search circuit
A) add circuit L) search circuit
D) delete circuit E) edit circuit
D) delete circuit E) edit circuit
D) delete circuit E) edit circuit
D) delete circuit E) edit circuit
P) prev page I) activate circuit
P) prev page I) activate circuit
P) prev page I) activate circuit
P) prev page I) activate circuit
N) next page R) deactivate circuit
N) next page R) deactivate circuit
N) next page R) deactivate circuit
N) next page R) deactivate circuit
X) exit to craft main menu
X) exit to craft main menu
X) exit to craft main menu
X) exit to craft main menu
A [0.0.0.204] [1,2] DIDCSU 2912 >
A [0.0.0.204] [1,2] DIDCSU 2912 >
A [0.0.0.204] [1,2] DIDCSU 2912 >
A [0.0.0.204] [1,2] DIDCSU 2912 >
