VeriFone VX-670 series, Installation Manual, Page: 26 / 52

T
ERMINAL
S
ETUP
Using the Smart Battery
26
V X 670 I
NSTALLATION
G
UIDE
To Connect the
Terminal Power Pack
1
Insert the round barrel connector into the power port in the Handy-Link
connector, as shown in
Figure 15 .
Figure 15 V
x
670 Power Pack Connection
2
Insert the AC power cord into the power pack.
3
Plug the AC power cord into a wall outlet or powered surge protector.
When the terminal has power, the terminal lights are activated and the LED
indicator remains lit.
If an application is loaded in the terminal, it starts after the initial VeriFone
copyright screen and usually displays a unique copyright screen. If no application
is loaded in the terminal,
DOWNLOAD NEEDED
appears on screen after the initial
VeriFone copyright screen.
Using the Smart
Battery
The V
x
670 terminal uses an Li-ion smart battery (see Accessories and
Documentation for ordering information). The internal logic of the smart battery
prevents both overcharging and undercharging (a fault condition in which the
battery level goes well below the minimum acceptable charge and the battery
becomes unusable).
The V
x
670 device can be equipped with two types of battery packs, the standard
battery pack and the high-capacity battery pack.
WARNING
Do not plug the power pack into an outdoor outlet or operate the terminal
outdoors.
Disconnecting the power during a transaction may cause transaction data files
not yet stored in terminal memory to be lost.
NOTE
To protect against possible damage caused by lightning strikes and electrical
surges, consider installing a power surge protector.
NOTE
The
V
x 670 terminal will operate on battery power or on power pack power. The
smart battery charger in the terminal will be active whenever the power pack is
connected.