VeriFone VX-670 series, Installation Manual, Page: 25 / 52

T
ERMINAL
S
ETUP
Connecting the Terminal Power Pack
V X 670 I
NSTALLATION
G
UIDE
25
4
Insert the SIM into the cardholder.
Figure 14 Inserting SIM Card
5
Install the battery (see Figure 16 ).
Connecting the
Terminal Power
Pack
When you have finished connecting optional peripheral(s), you are ready to
connect the V
x
670 terminal to the provided power source.
The V
x
670 unit comes with a universal input power pack capable of operating
from voltages of 100VAC to 240VAC.
NOTE
There is only one SIM slot, but there are multiple SAM slots. Make sure you insert
the SIM card into the SIM slot, as shown in Figure 14 .
CAUTION
Using an incorrectly rated power supply may damage the terminal or cause it not
to work as specified. Before troubleshooting, ensure that the power supply being
used to power the terminal matches the requirements specified on the bottom of
the terminal. (See
Chapter 3 , Specifications , for detailed power supply
specifications.) Obtain the appropriately rated power supply before continuing
with troubleshooting.