VeriFone e265, User And Best Practices Manual

Page: 49 / 78

S
YSTEM
M
ODE
- VTM
Download
E
355/
E
265 U
SER AND
B
EST
P
RACTICES
G
UIDE
49
4
Wait for VTM Menu 1.
5
Select 2 for Edit Parameters.
6
Press ENTER to select default file group 1.
7
Enter file group default password 166831.
8
Press ENTER.
9
Press ENTER to select default configuration file
CONFIG.SYS
.
10
Find
*GO
parameter either by continuously pressing ENTER key or by using
Find menu option.
11
After finding
*GO
parameter, select Edit option to change the value of
*GO
parameter.
Download This submenu is used to download software components or software packages in
the unit. User can also perform downloads in
DOWNLOAD NEEDED
screen, which
is displayed when application program (
*GO
value) is not loaded/present in the
unit. User is prompted to select file group number, single/multi app, full/partial
download, and communication port before starting the download.
Select default File group 1 when you are downloading OS, OS components and
base
NOVA
software package. Select either Single-app or multi-app. Single-app
selection will download files into group 1 only, multi-app selection will download/
clear files in multiple groups. Select either
Full dnld or Partial dnld , a full
download will delete all files in the group and flash memory will be coalesced. The
configuration parameters that start with * or # are retained after full download, a
partial download adds new files or replaces existing files in the file group. Select
communication port from available COM1, USB Device and TCP/IP ports.
•
COM1 download requires serial cables (P/N:CBL000-049-01-A), dongle (P/N:
SUB265-001-01-A) and may require serial to USB converter cable when your
PC doesn't have direct 9 pin serial port.
•
USB Device download requires USB cable with standard A type on one end
and Micro-USB connector type on the other end (P/N:CBL000-049-01-A,
shipped along with e355 unit).
•
TCP/IP download requires FTP client setup in PC and IP address of e355.
Please refer to EOS document for proper setup procedure.
Serial Download Software packages can be downloaded via COM1 port using serial cables. To
download a software package using COM1 port:
1
Press ENTER and 7.
2
Enter VTM's default password 166831.
3
Press ENTER.
4
Wait for VTM Menu 1.