Verex ISM/xL, Hardware Manual

Page: 7 / 66

22-0375 rev1.1
Monitor ISM/xL™ Hardware Guide 3
Keypad Modules
LCD Keypad
Module Current Rating
= 150mA max.
1 2 3
4 5 6
7 8 9
0
X
X
FIRE
POLICE
AUXILIARY
Emergency Keys
Apply emergency
label types
(supplied) in this
sequence to
match point type
default or blank
labels but, NEVER
LEAVE THESE
SPACES EMPTY!
System Trouble
Indicator Light
Area
Armed
Light
Steady =
STAY
Flashing =
Fully ON
Escape Key
Function Key
Left - Right arrow screen scrolling keys.
Down Arrow Keys

Red = Module Bus 12V Positive
Green = Module Bus Data "A"
Yellow = Module Bus Data "B"
Black = Module Bus Negative
Orange = Hardwired Input. Connect common to Black
Blue = Hardwired Output. Obtain negative from Black
Keypad
Wire
Connectors
'
-
#
ABC DEF
GHI JKL MNO
PRS TUV WXY
Z
_
Q
When
programming,
use this key
"_" to insert a
blank space
or clear a
character
when cursor
flashing
under it.
Power a device
(e.g. motion detector) from
Red (+) and Black
NOTE: This is Bus power and
must not be overloaded!
Piezo sounder
is one volume only
and not adjustable.
There is no Bus communications LED
indicator on the PCB board as whether the
LCD displays or not is used instead.
f
X
Both buttons must be pressed
at same time to activate.
(--)
WELCOME
Enter ID:
16 Character,
2 Line LCD
Screen
WARNING: If upgrading an existing previous version Fx LCD keypad with this one,
each keypad's base is a different size and their mounting holes do not align exactly
the same.
Recommended mounting height: 1.5 meters (4 feet, 9 inches) from floor level to the
bottom of the keypad.
The sticker with the 5 digit serial number, for programming the module in Module
Programming, is located on the keypad PCB back when the keypad base is removed.
Always secure keypad base to wall using 4 screws.
After placing the keypad
on its base, make sure
the keypad's securing
screw (supplied) is
always I N !
Apply dealer's logo label
(supplied) in the indented
space on keypad door.
XXXXX
Refer to Installation Instructions P/N 21-0369 for further information.