Rev 1.1 Cod. 00.009.126
39
RX PROBE CALIBRATION
WARNING,
make sure that the buffer solution used in the calibration correspond to the indicated value and that it is not
polluted.
OFFSET CALIBRATION
Immerse the RX probe in the buffer solution.
Wait for the reading stabilization on the
display. Press
ENTER / MENU
for 3
seconds and then use the ▼ ▲ keys to
move the cursor to Calibration and press
ENTER
twice. The current reading of the
probe is shown on the display. Press
ENTER
and adjust (if necessary) the buffer
reading value with the ▼ ▲ buttons and
then confirm by
ENTER
.
