Rev 1.1 Cod. 00.009.126
27
LANGUAGE
In the Set up menu, select "
Language
" with the cursor and
press
ENTER
.
Choose “English” with the ▼ ▲ keys and press Enter.
If you want to esc programming and return to measurement,
press the ESC button for 3 seconds.
MEASURE
The choice of the “Measure” is the second setting to do after the choice of “Language”.
To change the default measurement (pH) and switch to
Rx:
In the Set up menu, select with the cursor the submenu
"Measure" and press
ENTER
.
Use the ▼ ▲ keys to select pH or RX measure and press
ENTER.
If you want to esc programming and return to
measurement, press the
ESC
button for 3 seconds.
PASSWORD
The password protects the modification of the
Dosage
,
Utility
and
Relay
menus.
It does not block
Calibration
and
Set up
.
First definition of the password:
In the Set up menu, select "Password" by the cursor and
press
ENTER
.
Enter the password digit by digit selecting the number by ▼
▲ button and pressing
ENTER
.
After the selection of the 4th digit, press
ENTER
to save the
password. Take note of it carefully to not forget it. If it is not
possible to remember the password call the Customer
Service Assistance.
To esc programming and return to measurement, press the
ESC
button for 3 seconds.
Change password:
In the
Set up
menu, select "Password" by the cursor and
press
ENTER
.
Enter the old password digit by digit selecting the digit by ▼
▲ buttons and press
ENTER
.
After entering the 4th digit, pressing
ENTER
it is possible to
define the new password.
Enter the new password digit by digit selecting the digit by ▼
▲ buttons and press
ENTER
.
After entering the 4th digit, press
ENTER
to save the new
password.
Take note of it carefully to not forget it. If it is not possible to
remember it, call the Customer Service Assistance.
If you want to esc the programming and return to
measurement, press the
ESC
button for 3 seconds.
