Rev 1.1 Cod. 00.009.127
25
STRUCTURE OF THE MAIN MENU
3sec
Press the
ENTER / MENU
button for 3 seconds to enter
programming.
Use the ▼ button to move the cursor to the relevant
submenus. Press
ENTER
to enter the submenu.
If you want to esc programming and return to measurement,
press the
ESC
button for 3 seconds.
The
Set up
menu allows choosing:
The
Language,
the display
contrast
, the safety
Password
, the
activation
or
deactivativation
of the
Enable
input (dosing
enable) and of the peristaltic
hose breaking sensor
.
The
Dosage
menu allows choosing:
the type of dosing among Manual, Proportional and ON
-
OFF
.
The
Calibration
menu allows:
Calibrating the chlorine probe.
The
Utility
menu allows choosing:
to schedule or not the
Delay On
, the overdosage
TAL
alarm, the type of functioning of the
flow sensor
and finally to
Restore the factory programming
of the parameters and the
factory probe calibration
.
The
Relay
menu allows choosing:
the operation of the alarm relay (N.O or N.C), whether to include or exclude from the relay signal the various types of alarm
(Delay On, TAL, Flow, UR-OR, Stand by, Level, Enable, Hose break.).
MENU SET UP
3sec
Press the
ENTER/MENU
button for 3 seconds to enter
programming.
Select by the cursor the menu
SET up
and press
ENTER.
Use the ▼▲ buttons to move the cursor to the submenus.
Press
ENTER
to enter the submenu.
If you want to esc programming and return to measurement,
press the
ESC
button for 3 seconds.
IMPORTANT NOTE:
Enable and Brok. Hose sensor are optional. If on your pump they are not present you can not access the
respective submenus and in the menu will appear: