Vantage 5000
1.4v-09.2019
39 | Page
8.1.1 Select the Flow Mode
The operational Flow Mode is a default running mode.
Follow the steps below to make sure that Flow Mode is
selected:
u
Touch the icon
to unlock the screen and select the main
menu
.
u
To access the Job File Menu, touch the icon
.
u
Scroll through the available Job File and highlight the target
Job File.
u
To edit the Job File highlighted in red, touch the icon
.
u
Make sure the Flow Mode is selected as shown in the
Figure 41.
For more information about this screen, please see
(
g
7.4 Edit
Job Files).
u
Select
to accept all changes within the Highlighted Job
File and the user will be returned to the Job File menu as
shown in
Figure 42
. Changes made on this screen are not
saved until this icon is pressed.
u
To activate the Highlighted Job File and any changes made,
touch the icon
. If the pump is running, the activate icon
will be ‘greyed out’. Once a Job File has been activated, the
user will be prompted as per
Figure 43
.
Figure 38 Unlock the Screen and Select the Main Menu
Figure 39 Select the Job File Menu
Figure 40 Edit the Highlighted Job File
Figure 41 Select the Flow Mode
Note
Figure 42 Job File Menu
Figure 43 Job File Activated
