Page
42
of
68
Operation and maintenance manual Verdegro Blade
17.
For safe and trouble-free operation, the Blade must be held clean from snow and
ice .
18.
Be careful with fuels, lubricants, hydraulic oils and greases of the Blade. Avoid skin
contact with these substances. Exposure Danger !
19.
The Blade’s
regular inspection and maintenance of service - repair outsourcing to
an expert in this field service company.
20.
The construction of the Blade may not be altered without permission and the
manufacturer's instructions.
21.
Inspect the Blade every day before work or use.
22.
Axles control all bolts / nuts: Before each use the principal axes, bolts and nuts.
23.
Let the Blade annual inspect by the manufacturer or authorized distributor . The
inspection must take place more frequently if welding is done in supporting parts,
or other special reasons exist for the device to be debating. For modification and
repair, always contact the manufacturer!. After repair or replacement of parts, the
Blade should always be served a full operating test.
BLADE BV can only guarantee
a properly working machine when repair and service is done according the time
schedule by manufacturer or under their supervision by an official distributor.
24.
If you leave the Blade, put it somewhere where it does not preclude others. Keep
the whole machine in transport position. Close all hatches well for unauthorized
persons, turn the cabin controller off, and take your keys with you.
25.
The operator of the machine may not be under the influence of alcohol or
narcotic drugs.
26.
Follow the maximum speed limits at all times.
27.
Disconnect all power connectors when transporting a Blade TMA unit in an air
plane.
