Page
61
of
68
Operation and maintenance manual Verdegro Blade
•
Crash Cushion:
o
Control of cracks and dents or cracks in tubes and H beams structure
o
Brake bolts are tightened to cut and bend / Tube section M8 class 8.8 (4
pcs each side)
o
Inspection of inner Tubes, has to be clean surface ( no mud or sand etc.. )
Figure 47
•
Test running
o
Set up the entire machine as defined
o
Try all labor movements, which are not allowed to shock. After the test it
must be properly monitored or stressed parts do not exhibit cracks or
permanent deformation.
