Page
41
of
68
Operation and maintenance manual Verdegro Blade
7
Safety
1.
Read these instructions carefully before using the
“
Blade
”
.
2.
The Blade should not be used without knowledge of the operating instructions
and safety precautions. Keep the operating instructions, always within range of
the machine, the operator's manual should ALWAYS be at or near the machine.
3.
The operator of the Blade must be at least 18 years old and experienced and
trained in serving Truck Mounted Attenuators.
4.
The owner/holder of the Blade must ensure that all users are trained in the use of
the machine, have read this manual and have taken notice on all warning signs at
the machine.
5.
Be careful when the machine is used near live power lines.
Don’t touch the TMA
structure if the machine is within 50 meters of power lines.
6.
Transport the Blade only if it is properly secured to the truck using the standard
truck bracket.
7.
On the platform are no persons during storage and adjustment of the machine or
in transit.
8.
Make use at all times during the adverse influences of wind, rain, temperature,
brine, thunderstorms, snow, hail and ice.
9.
Use the Blade purely as Truck Mounted Attenuator, and not as a lifting
mechanism or any other device.
10.
The wind load of the Blade does not increase with additional signs or other
objects that could catch wind.
11.
Operate the machine in a smooth continuous motion to avoid distraction or shock
effects to passing people.
12.
Inspect the entire machine for loose materials such as bird nests, twigs, leaves,
but also tools, bolts, nuts, etc. which may end up on the lanes during mobilization
or transport.
13.
The Blade has to be cleaned regularly, this to make sure dirt, salt, twigs or leaves,
are washed off (each month or more , do not high pressure wash ).
14.
Do not hoist the Blade!
15.
The safety devices are not deactivated during use, if malfunction occurs must The
Blade be repaired by a qualified repair service company or by the Verdegro Group
before the unit can be used again.
16.
Make sure no one is near the machine before or during operating. Guiding the
machine or the operator is also not allowed in the rotation range of the machine!
Always keep your sight on the machine while operating.
