CONFIGURATION
B001032
CONFIGURATION
LINK UP CONFIGURATOR APP
To configure the sensor, some parameters must be calibrated
through the Link Up gateway, like sensor type, engine instance
or warning threshold.
This is possible through the “Link Up Configurator” smartphone
App, which can be downloaded free of charge from the stores
of both Android and iOS devices.
A simple and detailed explanation of the configuration process
is also available as in-app instructions.
Thanks to the passive embedded NFC receiver, the Link Up
gateway can be configured, as described below, without the
need of power supply.
LINK UP CONFIGURATOR
Link Up Configurator App is available
for both iOS and Android devices
SENSOR CONFIGURATION
•
•
1.
Launch the “Link Up Configurator” App and read
the actual configuration of the Link Up device by
“tapping” the smartphone onto the Link Up
wireless area (indicated by the red arrow).
NOTE: The antenna position on the smartphone
depends on the model.
Please refer to the smartphone manufacturer
manual.
