![Veratron LINK UP 2-in-1 Operating Instructions Manual Download Page 7](http://html1.mh-extra.com/html/veratron/link-up-2-in-1/link-up-2-in-1_operating-instructions-manual_1003222007.webp)
SYSTEM INSTALLATION
B001032
SYSTEM INSTALLATION
WARNING
Before beginning, disconnect the negative terminal on the battery, otherwise you risk a short circuit.
If the vehicle is supplied by auxiliary batteries, you must also disconnect the negative terminals on these batteries! Short circuits can
cause fires, battery explosions and damages to other electronic systems. Please note that when you disconnect the battery, all volatile
electronic memories lose their input values and must be reprogrammed.
BEFORE THE ASSEMBLY
1.
Before beginning, turn off the ignition and remove
the ignition key. If necessary, remove the main
circuit switch
2.
Disconnect the negative terminal on the battery.
Make sure the battery cannot unintentionally
restart.
3.
Place the device at least 500 mm away from any
magnetic compass.