Page 22
BVI 3000 Operator’s Manual
Adjusting Preferences
Parameter
Range & Value
Descriptions
Backlight
AUTO (default)
ON
OFF
AUTO = Backlight turns on and off automatically,
depending on ambient light conditions.
ON = Backlight always on
OFF = Backlight always off
Beep Volume 0-9 (default = 5)
Allows user to adjust sound volume (lower values are
quieter)
Language
ENGLISH (default),
DANISH, DUTCH,
FINNISH, FRENCH,
GERMAN, ITALIAN,
NORWEGIAN,
PORTUGUESE, SPANISH,
SWEDISH, TURKISH
Specifies the language used for displays and printouts.
Date
MM/DD/YY (default)
DD/MM/YY
YY/MM/DD
Select the date format (order of month, day, year)
Printout
ADD_WALLS (default)
ADD_WALLS - Print grayscale B-mode images with
bladder walls highlighted.
NO_IMAGES
NO_IMAGES = Do not print any B-mode images.
RAW_ONLY
RAW_ONLY = Print grayscale B-mode images without
identifying.
WALLS_ONLY
WALLS_ONLY = Bladder outline only.
12_PLANES
12_PLANE = All 12 scan planes, printed as in the ADD_
WALLS mode.
UTI_rate
0-1000 (default = 3%)
Percentage of catheterizations which result in UTI; used in
cost savings calculations.
UTI_cost
0-2000 (default = $680)
Cost to treat a UTI; used in cost savings calculations
Cath_cost
0-20 (default = $3)
Cost of a catheter; used in cost savings calculations
Cath_vol
0-1000 ml (default = 3000
ml)
Bladder volume below which catheterization in
unnecessary; used in cost savings calculations
Flash
ON (default)
ON = Flash memory enabled and scan results are saved
even is power is removed.
OFF = Scan results are not saved if instrument is turned
off; however, processing time is slightly faster.
Time Zone
GMT ± 0-12
This function is currently not used.
Contrast
Adjust
30-63 (default = 57)
Adjust display contrast ratio; the higher the value, the
darker the background.
Note:
An immediate effect is seen only when adjusting the contrast volume up. Adjusting the contrast
volume down becomes visible when the instrument is turned off and on again.
