Page 19
BVI 3000 Operator’s Manual
Adding a Patient ID and Notes
Adding a Patient ID
Number
A patient ID number (maximum 10 digits) can be added to the scan
result and will be included on the printout. To add a patient ID number,
press the # button on the Scan Results screen. The screen displays
0000000000.
• Use the
ß
(arrow left) and à (arrow right) buttons to select the digit
you want to change (the selected digit is underlined).
• Use the + (plus) or -- (minus) buttons to select the correct number.
• Continue to use the
ß
(arrow left) and à (arrow right) buttons and the
+ (plus) or -- (minus) buttons to enter all the digits of the patient ID
number.
• When the patient ID number has been entered, press the DONE button
to return to the Scan Results screen.
The patient ID number will now be included on the printout of the scan.
Note:
Only press the button
marked # when a patient ID
number is required. If the #
button is used and no patient
ID number is entered, the BVI
3000 will assume a patient
ID number was entered and
0000000000 will be printed on
the printout.
After a scanning procedure has been completed, it is possible to annotate
the measurement results. Press the button marked NOTES on the Scan
Results screen. When the Notes option is selected, notes appear on the
printout of the exam data.
The operator can change the following settings to annotate the exam:
Exam Type
Default settings:
• If the measured bladder volume is less than 100 ml, the BVI 3000
assumes the measurement was taken after patient voiding and
“POSTVOID” is displayed on the screen.
• If the measured bladder volume is between 100 ml and 400 ml,
the BVI 3000 assumes the measurement was taken prior to patient
voiding and “PREVOID” is displayed on the screen.
• If the measured bladder volume is greater than 400 ml, the BVI 3000
assumes the measurement was taken prior to patient voiding and the
bladder was filled to maximum capacity. “CAPACITY” is displayed
on the screen.
• If the default does not apply, the Exam Type setting can be changed
by pressing the EXAM TYPE button to toggle between options. The
selected exam type will appear on the right side of the LCD screen.
Adding Notes
