Verasys® 32 Point 24 VAC Application Controller Installation Instructions
6
Factory Wiring
For all the I/O terminals listed in Table 5, use the correct gauge wiring. For each spade terminal in this application,
follow the guidelines in Table 5 and use a spade connector with screw terminals. Figure 3 shows
I/O spade terminals.
Figure 3: Verasys Application Controller Spade Terminals
Field Wiring
For all I/O terminals listed in Table 5, use the appropriate gauge wiring. For each spade terminal in this application,
follow the guidelines in Table 5 and use a spade connector with screw terminals.
Figure 4: Verasys Application Controller Spade Connector with Screw Terminals
