background image

Installation manual V610 Oslo

7

controler no.

date

particulars

Warranty conditions

The factory warranty is valid only if the assembly has been executed by a 

certified engineer (professional placement). During the manufacturing of its 

products, Verano® has used the greatest precision. However, if during the 

normal use and maintenance within 5 years after the purchase date, there 

are faults resulting from manufacture or construction errors, provided that 
all the instructions concerning the correct use and maintenance have been 
followed, Verano® will put at the dealer’s disposal the replacement material, 
for free.

Warranty:

-   The term is not extended or renewed because of repair or the     

  

   replacement of faulty parts;
-   Does not include the replacement of fuses, limit switches and slide  
   contacts;
-   It is Verano®’s obligation to give to the buyer whatever right  

 

   to compensation or dissolution of the purchase contract;

-   Verano® reserves its right, without previous notification, to carry out  

   changes in its products;
-   All our transactions occur according to the conditions deposited  
   at the Chamber of Commerce in Eindhoven under number 17119924;
-   Small colour changes can occur due to the fact that the ordered    
   colours are manufactured according to the number or that a present  
   steel colour is imitated;
-   The paintwork is not resistant to strong chemicals and /or damage   
   with a sharp tool;
-   Some colour shade can occur due to the fact that the colours can be  

   more or less effected by UV-radiation (sun light).

The warranty elapses:
-   As a result of insufficient maintenance or incorrect use;
-   The product is not fitted by a certified engineer;

-   Normal wear resulting from use;

-   Discoloration due to effects of weather;

-   Faulty assembly.

The second party does not derive a right from the warranty other than the 
one above mentioned, especially the right to compensation in case of con-

sequential loss and also due to faults of third parties. Also inconsequential 
damage will not be compensated. The second party indemnifies us against 
all the consequences of the other claims of his customers.

MANUFACTURERS WARRANTY

14010206-161103EN

Summary of Contents for V610 Oslo









Reviews: