ELGA
MEDICA Pro 30/60/120 US Operator Manual
`
MEDICA Pro 30/60/120 US MANU40594 Version 1
– 07/14
Page 9
Step 5
–Set units of measure - Volume (screen 021)
This screen allows units of water volume to be set, to
either
Litres
or
US Gallons
. This only indicates the
volume in the reservoir.
1. PRESS
to change (L or USG)
OR
PRESS
✔
to proceed to step 6.
2.
PRESS
✔
.
Step 6 - Set UOM
– Pressure (screen 022) R/RE variants only.
This screen allows preferred displayed units of water
pressure to be set, to either, psi or Bar. This only indicates
the pressure as measurement in the recirculation loop.
1.
PRESS SCROLL
to change mode (psi or bar)
OR
PRESS TICK
✔
to proceed to step 7.
2.
PRESS TICK
✔
.
Step 7 - Water purity unit setting (screen 023)
This screen allows preferred displayed units of water purity
to be set, to either,
M
.cm
or
µS/cm
. This only affects the
quality measurement in the recirculation loop.
1. PRESS SCROLL
to change mode (M
.cm or
µS/cm)
OR
PRESS
✔
to proceed to step 8.
2.
PRESS
✔
.
Step 8 - Uncompensated water quality (screen 024)
A U will indicate uncompensated readings (recirculation
loop only) in the normal process screen.
1.
PRESS
to change (
= Uncompensated water
quality ON)
OR
PRESS
✔
to proceed to step 9.
2.
PRESS
✔
.
Note: This mode is for validation purposes only
and should not be selected as standard.
Uncompensated water quality
screen
Set units of measure - volume
Set units of measure - pressure
Water purity unit setting
All manuals and user guides at all-guides.com
all-guides.com
