SW-3C 3 band CW QRP Transceiver
manual
Specifications
Size: 100*44*103mm (not including protrusions such as knobs)
Weight: about 250 grams.
Input voltage: 10-14VDC.
Current consumption:
When receiving, turn on the backlight about 80mA, turn off the backlight about 65mA.
When transmitting, about 0.7-0.8A (when voltage is 12V)
Frequency Range:
Receiving 5-8MHz, 8-11MHz, 11-16MHz (the peak receiving sensitivity is only in the 40m, 30m, 20m amateur
band)
Transmit: 7.0-7.2MHz, 10.1-10.15MHz, 14.0-14.35MHz.
Filter: CW, SSB, automatically switch according to the mode, CW filter bandwidth is about 400Hz, SSB is
about 2KHz.
RIT/XIT RIT adjustment range: -9KHz to +9KHz, XIT adjustment range: -30KHz to +30KHz.
RF Output power: about 5W (when the power supply voltage is 12V)
Side tone: 600Hz
Automatic keyer: The speed of the built-in automatic keyer is adjustable.
Stored frequency memories: Each band has 8 stored frequency memories, the frequency and mode can be stored
by the user.
Receive mode: CW, CWR, USB, LSB. CW signal can also be transmitted in SSB working mode, so as to realize the
cross communication of CW/SSB.
AGC Simple audio AGC, S meter shows the relative strength of the signal.
