Power switch and Gain control
The power switch is in the lower left corner of the panel, turn it to the right to turn on the power.
The AF GAIN knob on the left side of the radio panel is the audio gain control knob, turn it clockwise to the end to
maximize the gain.
ATT
The ATT button is on the back of the radio. Press this button. The radio's high frequency gain is attenuated by about 15dB, and the LCD
screen will display the word ATT.
BAND
The BAND button on the panel is the band selection button. Each time you press the BAND button, the radio will switch the bands in the
order of 40m, 30m, and 20m. When the band is switched, it will get into the last stored frequency memo in the corresponding band. Each
band has 8 stored frequencies. The frequency and mode of each frequency memo can be set by the user.
M/V/S
Tap this button once to switch between memory frequency (MEM) and VFO. The upper left corner of the LCD screen
will display MEM-** or VFO-** (** is a number from 01-08). When MEM-** is displayed, it is the mode of storing
frequency memo. At this time, turning the knob on the right can change the stored frequency memo. Turn
clockwise to increase and counterclockwise to decrease. When VFO-** is displayed, it is the mode of changing the
frequency. At this time, turning the knob can change the frequency, turning clockwise to increase the frequency,
and turning counterclockwise to decrease the frequency.
