10
VTS reserves the right to implement changes without prior notice
Ventus Air Handling Units
Transport of assembled blocks of AHUs described in Table 2 as fit for transport should be carried out
with the use of a fork lift or a crane (fig. 5).
For the transport of the units VS 21-150 with the crane should be used some metal holder and
wooden supports or use the holes in the base frame supports in order to mount an appropriate pipe
bar. In the case of transport VS 180-650 units with the use of a crane it is necessary to use holes in
the frames in order to mount an appropriate pipe bar. Lifting strings must be spaced with the use of
beams of appropriate length.
Fig. 5a Using a forklift truck to transport the unit
Fig. 5 Transport with the use of a crane
b) VS 21-150 AHUs with using wooden supports
c) VS 21-150 AHU sections with using steel pipes
d) VS 180-650 AHUs
AHU have to be transported in their working position (horizontally) and they should not be stored one
on the other.
The units and their components should be stored in rooms characterized by the following conditions:
relative humidity:
φ
< 80 % at t (temperature) = 20ºC
ambient temperature: -40ºC < t < +60ºC
- the devices should be out of the reach of any caustic dust, gas or steam as well as any other
chemical substances which may have pro-corrosive influence on the unit and its components.
While storing the unit, its plastic packaging must be unsealed.
Any damages caused by improper transportation, unloading or storage are not covered
by the guarantee and any claims laid by way of aforementioned issues will not be
examined by VTS
.
c)
d)
