6
5
. Listening to Music in iPod/iPhone in "AMP" Mode
Turn the power ON by the power switch volume knob
and set the toggle switch (L) to "
" position.
Once this product and iPod/iPhone are correctly
connected (authenticated), the toggle switch LED turns
on red or green.
* If the toggle switch is blinking, iPod/iPhone may not be
connected with this product at all, or it may not be correctly
connected (authenticated).
In such case, disconnect iPod/iPhone once and recoonect,
or turn the power OFF by turning the power switchvolume
knob counterclockwise all the way until it clicks, and then
turn the power ON again.
6
. Synchronizing with iPod/iPhone and
iTunes on Computer
Connect the USB micro B connector on the rear panel of
this product and your computer with the supplied USB
cable.
By setting the toggle switch (L) on the front panel to
"
" mode, it enables synchronization with iTunes
on your computer. "SYNC" state is the same as if iPod/
iPhone was directly connected to your computer.
CAUTION
Do not change the switches or disconnect the
microUSB cable during synchronization.
1
1
2
2
USB