4
2
. Charging the Built-in Battery of this Product
Connect the USB micro B connector on the rear panel of
this product and computer or the USB charging adapter
supplied with iPod/iPhone by using the supplied USB cable.
The built-in battery is charged by setting the toggle
switch (L) on the front panel to "
" or "
"
mode. (Make sure the power is OFF.)
During charging, the charging status indicator LED
located on the side panel will light up.
* When the built-in battery of this product has been fully
charged, it will automatically start charging iPod/iPhone. It
takes approximately 6 hours to fully charge this product.
* The charging status LEDs turn off when the USB cable is
disconnected.
1
2
Charging status indicator
Charging status
LED
Pre charge
○
●
Charge
○
Complete
●
LED color
○：
Orange
●：
Green
CAUTION
If both LEDs are off or become off when the USB
cable is connected, immediately disconnect the
USB cable and stop charging.
Please refer to "Troubleshooting" on page 9 of
this User's Guide and reset before reuse.
USB