VentureCraft Go-Dap TT User Manual Download Page 11

11

 Cautions on Use

In orderto use this product safely and prevent accidents, 
please take the following cautions.

 

A tube is mounted on this product. In order to avoid a unit 
breakdown/malfunction, do not give a vibratory motion 
and a drop and do not use in high-temperature and high-
humidity environments.

 

In order to avoid risks such as fire and electric shock, do not 
use in high-humidity environments or where this product 
may come in contact with water.

 

Do not use, charge or leave this product in locations 
exposed to direct sunlight such as car dashboards and 
window sills. Also, do not use, charge or leave in high-
temperature environments such as inside vehicles parked 
in the sun or near heat sources such as heaters and stoves.

 

Do not use to play music, etc. while driving a vehicle, riding 
a bicycle, or walking.

 

If liquid that has been leaked from the battery makes 
contact with your skin or cloths, wash under running water 
immediately. Also, if such liquid enters your eyes, wash 
under running water immediately without rubbing and 
consult a doctor.

 

Do not disassemble, modify, or repair this product by 
yourself.

 

If this product does not get fully charged after the specified 
charging time, cease charging and arrange for inspection/ 
repairs to be performed.

 

Use a soft cloth to clean this product. Do not directly apply 
water, dust spray, solvent, polisher, cleaning agent, etc.

 

When charging an iDevice by the built-in battery of this 
product, operate in a drafty environment. Operating in 
a hermetically-closed environment may cause a unit 
breakdown/malfunction and a low-temperature burn by 
the temperature upshift.

 

The battery has a life duration. The usable duration will 
become shorter due to aging degradation. Do not keep 
charging for a long period of time. Always disconnect the 
USB cable each time when charging is completed.

Battery Disposal and Recycle

When disposing of this product, do so in accordance with 
the laws and regulations applicable in the area you live. 
This product has a built-in battery therefore can not be 
disposed of together with general household waste.

Replacement of Tube

The mounted tube has a life duration.
When feeling degradation, it is recommended to replace.
For more information, contact Product Support on page 14.

Summary of Contents for Go-Dap TT















Reviews: