VentureCraft Go-Dap TT User Manual Download Page 12

12

For the customers in the USA INFORMATION:

This product has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules. 
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. 
This product generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio 
communications. 
However, there is no guarantee that interference will not occur 
in a particular installation. If this product does cause harmful 
interference to radio or television reception, which can be 

determined by turning the product off and on, the user is 
encouraged to try to correct the interference by one or more 
of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the product and receiver.
– Connect the product into an outlet on a circuit different 

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician 

for help.

You are cautioned that any changes or modifi cations not expressly 
approved in this manual could void your authority to operate this 
product.

If you have any questions about this product:
Visit: http://go-dap.com
Contact: Venture Craft Customer Information Service   
+81-3-5204-1004
This device complies with Part 15 of the FCC Rules. Operation 
is subject to the following two conditions: (1) This device 
may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that 
may cause undesired operation.

For the customers in the USA and Canada

RECYCLING LITHIUM-ION BATTERIES

Lithium-ion batteries are recyclable.
You can help preserve our environment by returning your 
used rechargeable batteries to the collection and recycling 
location nearest you.
For more information regarding recycling of rechargeable 
batteries, call toll free 1-800-822-8837, or visit http://www.
rbrc.org/ .
Caution: Do not handle damaged or leaking Lithium-ion 
batteries.

Summary of Contents for Go-Dap TT















Reviews: