K103B : Issue 3 : May 2014
Page 3 of 4
Manufactured by:
128-134 Maui Street, P.O. Box 10-393, Hamilton, New Zealand
Tel64 (7) 849 4392, Fac64(7) 849 4114
E-mail: [email protected] Internet: www.ventura-bike.com
GENERAL INSTRUCTIONS FOR USE
Locking Device Tightening Instruction
For racks with formed indents on swaged ends.
1
Ensure the knurled locking nut is wound fully back and is
in contact with the head of the locking device.
2
Tighten the locking device firmly and securely by hand
making sure that it is centrally located in the indented
groove on the swaged legs of the rack.
3
Turning the knurled locknut clockwise, tighten firmly by
hand. Using the key tighten an extra 2mm (
1
/
8
" approx)
of circumference travel.
For racks without indents
1
Ensure the knurled locking nut is wound fully back and is
in contact with the head of the locking device.
2
Tighten the locking device by hand until it comes into
positive and firm contact with the rack.
3
Using the key, tighten a further 1.125 (1
1
/
8
) turns.
4
Turning the knurled locknut clockwise, tighten firmly by
hand. Using the key tighten an extra 2mm (
1
/
8
" approx)
of circumference travel.
BEFORE USE
All fasteners and components must be checked for tightness and
security before each ride.
RECOMMENDATION
Any surfaces that could possibly come in contact with the pack(s)
should be covered with protective material such as abrasion
resistant film, to prevent marking or damage to the surface finish.
RIDING SOLO
When riding solo always have the pack facing forward with the load
over the pillion seat.
RIDING WITH A PILLION PASSENGER
When riding with a pillion passenger the pack must be fitted facing
rearwards.
WARNING
-
The VENTURA Bike-Pack System was not
designed as a back rest and should not be used as one by the
pillion passenger.
SECURING PACK TO PACK-RACK
To secure the pack use the straps with the quick release clips and
attach around the horizontal rung on the Pack-Rack carrier. On
some models the quick release system is not available. In this
situation loop the shoulder straps around the rung and fasten to the
buckle. If any of the securing straps hang down below the rack,
and could possibly get damaged from an under seat exhaust, loop
the straps up behind the quick release clips or buckles.
PACKING THE PACK
Always place heavy items at the bottom of the pack and load
evenly. Do not position sharp objects against the fabric of the pack.
MAXIMUM CARRYING CAPACITY
Unless specified to the contrary in the fitting instructions or the
motorcycle manufacturers recommendations/specifications the
recommended maximum load capacity of this system is 9kg
(20lbs). It is important that the pack is always securely fastened to
the Pack-Rack.
MAXIMUM SPEED
The maximum recommended speed that this system can be used
is 130 kph (80mph) or the legal speed limit, whichever is the lower.
This limit may be reduced by other accessories, worn tyres,
improper handling, overall motorcycle condition or weather
conditions.
REMEMBER
Exceeding the weight capacity or the recommended maximum
speed may drastically affect the motorcycles handling, stability and
performance.
L-BRACKETS
The L-Brackets must always have the Pack-Rack, Sport-Rack or
Grab-Handle fitted.
ADDITIONAL REAR VISIBILITY
Carrying luggage may sometimes partially obscure your tail light
causing your safety to be compromised...
VENTURA have this covered!
Our VTL-001 auxiliary LED 12v stop/tail lamp is flexible and may
be fitted to any surface on the back of your motorcycle using the
adhesive backing or the mounting bolts supplied.
IMPORTANT
The
VENTURA
BIKE-PACK SYSTEM is designed as a complete
unit. The use of non
VENTURA
parts, bags or other attachments
will render the warranty void.
The Ventura Bike-Pack System was designed to be used with the
models specified in our fitment list in their original standard
specification. Unless otherwise specified the fitment of optional or
non standard parts and accessories will render the warranty void.
Dold Industries Ltd., or its re-sellers, cannot be held responsible for
loss or damage however caused in the event of its equipment
being used with Motorcycles fitted with optional or non standard
parts and accessories unless specifically specified by Dold
Industries Ltd.
The following
VENTURA
accessories are available for these/this
model motorcycle(s):
VENTURA
Light-Guard :
VP291 (Ninja 650)
VP293 (ER-6N)
VENTURA
Auxiliary LED Lamp: VTL-001
"Happy and Safe Motorcycling"
The following instructions should be
strictly adhered to. Failure to do so may
result in an accident causing injury or
death.
