www.ventilation-system.com
12
DUCT HUMIDITY SENSOR MOUNTING AND CONNECTION
The HV1 duct humidity sensor is a special accessory and is purchased separately. Connect the contact socket of the humidity sensor to the
contact socket located inside of the heat recovery unit. After that fix the sensor using the clamp and the holder in the air duct upstream of the heat
exchanger.
Humidity sensor
1.
2.
3.
DUCT HUMIDITY SENSOR CONNECTION
OUTDOOR TEMPERATURE SENSOR MOUNTING AND CONNECTION
The unit is supplied with an outdoor temperature sensor.
The outdoor temperature sensor mounting is as follows:
1. Remove two screws that retain the sensor cover.
2. Take off the sensor cover.
3. Install the sensor on the outer wall. The installation place must not be subjected to direct solar light.
4. Install the sensor cover back.
5. Connect the sensor to the X1 terminal block in compliance with the electric wiring diagram.
1
3
2
4
