background image

3

www.ventilation-system.com

•  Do not close or block the intake or extract vents in order to ensure the efficient air flow.
•  Do not sit on the unit and do not put objects on it.
•  The information in this user’s manual was correct at the time of the document’s preparation. 
•  The Company reserves the right to modify the technical characteristics, design, or 

configuration of its products at any time in order to incorporate the latest technological 
developments.

•  No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in 

any form or by any means in any information search system or translated into any language in 
any form without the prior written permission of the Company.

WARNING! Similar to the use of any other household electrical appliances when 

operating this fan, the following basic rules must be followed:

•  Never touch the unit with wet or damp hands.
•  Never touch the unit when barefoot.

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have been 
given supervision or instruction concerning use of the appliance by a person responsible for 
their safety.
Children should be supervised to ensure that they do not play with the appliance.

The connection to the supply mains must be made through a means of disconnection, 
which is incorporated in the fixed wiring in accordance with the wiring rules, and has a 
contact separation in all poles that allows for full disconnection under overvoltage category III 
conditions.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or 
similarly qualified persons in order to avoid a safety hazard.

Ensure that the appliance is switched off from the supply mains before removing the guard.

Precautions must be taken to avoid the back-flow of gases into the room from the open flue of 
gas or other fuel-burning appliances.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED DOMESTIC  WASTE.

Summary of Contents for TwinFresh Style Wi-Fi

































Reviews: