10
TwinFresh Style Wi-Fi
www.ventilation-system.com
6. Remove the three retaining screws from the left cover to enable access to the terminals.
Route the power wires through the appropriate cable glands.
Left cover
Covers the cable entry points and connection terminals
Right cover
Covers the control board
Cable glands for power cables
Cable glands for sensor cables
Transparent cover
Closes the DIP switches
7. Fix the back part of the indoor unit on the wall with the screws supplied with the mounting kit of the ventilator.
8. Route the power cable as figured below and connect the ventilator to power mains in compliance with the external wiring diagram,
see section
Connection to power mains
. Secure the power cable with the clamp.
XP1
XP2
XP3
XP1
GND
N
H1 H2 IN1 IN2
L
IN
12V
Circuit board
A3
Circuit
board
A1
Summary of Contents for TwinFresh Style Wi-Fi
Page 30: ...30 TwinFresh Style Wi Fi www ventilation system com...
Page 32: ...V222 1EN 01...
