7
BUCKET FAN PARTS
The Bucket Fan can be angled if needed. All
it takes is a 13 mm socket wrench. Loosen the
bolts on either side of the fan, place at the angle
you want, then re-tighten the bolts.
1) Electrical junction box on protective grille.
2) Vibration absorbing mount
3) Metal case
4) Handle
5) Handle bolts
6) Casing
7) Sound-Insulation Layer
8) Airfl ow Straightener
9) Wing Head bolt
1
2
3
4
5
6
8
7
9
Fig. 4
Fig. 5
The destratifi cator (see Fig. 5) consists of an
axial fan attached to the casing via the vibration
mounts. The destratifi cator has a polymer coated
steel casing.
The destratifi cator is equipped with a single-
phase asynchronous motor with an external
rotor and an axial impeller. The motor is
equipped with built-in thermal protection
enabling its automatic restarting and utilizes
rolling-element bearings. The motor protection
class is IP 44.
The Bucket Fan Whisper casing has special
perforation and a sound-insulating layer of
mineral wool to reduce the noise generated
by the axial fan. The Bucket Fan Whisper
destratifi cator has a fl ow straightener at the
discharge which ensures direct air fl ow and
maximum air throw distance.
The destratifi cator is mounted by means of the
bow bracket (Bucket Fan Whisper can be fi xed
with 15° steps) as well as the mounting and the
safety cables with threaded joints.
Bucket Fan Whisper
Bucket Fan