6
Bucket Fan
Bucket Fan
Fig. 3
Tip: It is easier to attach the Hanging Cable and Gripple to the structure fi rst and then attach the fan
with the toggle.
1) Insert the cable into one of the openings in the Gripple
2) Place the cable over the I-beam, truss, or other structure from which it is being hung.
3) Insert the end of the cable into the other opening in the Gripple.
4) Adjust to desired height
5) Insert toggle into the top hole on the handle.
Attaching the Safety Cable
1) Insert the cable into one of the openings in the Gripple
2) Place the cable over the I-beam, truss, or other attaching structure at a 40
0
to 50
0
angle
3) Insert the end of the cable into the other opening in the Gripple.
4) Insert toggle into the top hole on the handle.
5) Take the slack out of the safety cable by pulling the cable through the Gripple.
NOTE:
The cable should not be so tight as to be pulling the fan to one side. The cable should not be
so loose that the cable could get caught or tangled in the motor.
Hanging
Cable
Safety
Cable