Ventrac Terra Rake KR502, Operator'S Manual & Parts Drawings

Page: 5 / 31

INTRODUCTION
Introduction - 5
Product Description
The Ventrac KR502 terra rake is designed to level or spread soil, sand, gravel, and other similar loose
material. It can also be used to remove rocks or unwanted debris in preparation for seeding a new lawn.
The KR502 is a front mounted attachment, which allows the operator to keep material from being driven over
and compacted. It also allows the operator to view the operation of the terra rake while facing the direction of
travel. The terra rake can also be mounted to the rear 3-point hitch with a Ventrac 3-N-1 adapter.
The terra rake can be hydraulically angled up to 28 degrees right or left.
If a wider surface area is needed, optional 10 inch (25.4 cm) extensions are available, giving the operator
an additional 20 inches (50.8 cm) of surface area.
Why Do I Need an Operator’s Manual?
This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator’s manual for each piece of Ventrac equipment you own.
Reading the operator’s manual will help you become familiar with each specific piece of equipment. Under -
standing the operator’s manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.
INTRODUCTION
Accessories
Item Description Part Num
ber
Terra Rake Extension Kit (20” overall) 70.8034
KR Hydraulic Height Adjustment Cylinder Kit* 70.8035
Flat Free Tire/Wheel Assembly (requires 2 per rake) 53.0148
*Power unit must be equipped with a front 12 volt switch & plug kit.
V
enture Products Inc. is pleased to provide you with your new
Ventrac terra rake! We hope that Ventrac equipment will
provide you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility
as you use your KR502. Please visit our web site,
or contact your authorized Ventrac dealer for a complete list of
items available for your new terra rake.