Operation - 15
Height Adjustment Link
A
Turning the height adjustment link (A) will raise or
lower the tines on the terra rake.
Terra Rake Angle
(Secondary S.D.L.A. Lever*)
The secondary S.D.L.A. lever* on the power unit con
-
trols the angle of the terra rake. The terra rake can be
angled up to 28 degrees to the left or the right.
Hydraulic Height Adjustment Cylinder
B
The optional adjustment cylinder (B) replaces the
tine depth adjustment link on the terra rake. It
couples with a 12 volt switch* on the power unit to
allow the operator to control the tine depth using the
secondary S.D.L.A. lever* on the power unit.
NOTE: the power unit must be equipped with a front
12 volt switch and plug kit in order to operate the
adjustment cylinder. Refer to your power units oper-
ator’s manual for the correct kit for your power unit.
Hydraulic Function Selector
C
The 12 volt on/off switch* on the power unit couples
with the directional valves (C) to select the function of
the secondary S.D.L.A. lever* A flip of the switch will
allow the secondary S.D.L.A. lever* to control either
the rake angle or the tine depth of the terra rake.
OPERATIONAL CONTROLS
* Refer to power unit operator’s manual for operation of
power unit controls.
Summary of Contents for Terra Rake KR502
Page 21: ...Blank Page ...
