SAFETY
Safety - 13
LW450 Safety Procedures
•
WARNING
10 degree maximum angle of operation of power
unit with weather cab installed.
CAUTION
Do not exceed 30 amp draw to weather cab and
additional accessories.
The cab door must be closed and latched during operation of power unit and LW450 weather cab.
• Window latches must be locked in either the closed or open position during operation of power unit and
LW450 weather cab.
• Do not place any part of your body outside of the cab (through windows, door, or any other opening) during
operation of power unit and LW450 weather cab.
• The LW450 weather cab is equipped with an emergency exit (the right side front window). Learn to use the
emergency exit prior to operating the power unit and LW450 weather cab. Refer to the General Operation
section of this manual for instructions on using the emergency exit.
• Inspect the LW450 weather cab after striking any foreign object to assure that all cab parts are safe, secure,
and undamaged. Make all necessary repairs before proceeding.
• Do not modify or alter the LW450 weather cab, or any of its components or operating functions.
Roll-Over Protective Structure
Your LW450 weather cab is equipped with a Roll-Over Protective Structure (ROPS).
• Certified seat belt anchor: ISO 3776-2 & ISO 3776-3.
• Certified ROPS: ISO 21299 = maximum GVW of 2,750 pounds (1,250 kg).
• Always wear the seat belt during operation. Never jump from the power unit.
• If damaged, the ROPS or seat belt must be replaced before operation.
Alterations or modifications to this machine can
reduce safety and could cause damage to the
machine. Do not alter safety devices or operate
with shields or covers removed.
