Surveillance
– Record – General / Main Stream
4.3 Surveillance – Record - General
Reminder:
Save each tab individually before proceeding to next tab
This section covers the general system wide setting of the XDR
1.
System –
PAL / NTSC (Default = NTSC)
2.
Overwrite
: How the system stores new recording once the storage is full
-
Capacity
: As SD storage is full, system will overwrite oldest data
-
Date
: XDR will overwrite old data based on date
-
Alarm
: XDR will overwrite old data based on alarm
4.
Lock Duration
: Number of days to lock an alarm event file 1 – 31 days (Default 7 days)
5.
Pre-Recording
: Enable/ Disable and Length of recording before an event
(Recommend 1 to 3 minutes)
26
4.4 Surveillance – Record – Main Stream
This section enables, disables individual cameras as well as custom parameters for each. If setting
is same for all cameras, click “Copy To > All”.
1.
Channel:
Select the camera from Channel 1 - 5
2.
Channel Name:
Assign name to each channel - optional ( rear, side door, interior…etc)
3.
Enable:
Enable or Disable each camera in the system. If camera is NOT enabled, it will NOT
record in the system
4.
Resolution
: Select resolution for camera (
Analog Camera
= CH 1 ~ 4,
HD Camera
= CH 5)
(CH 1 – 4) D1/ HD1 (Half D1) / CIF / WD1 / WHD1 / WCIF (CH 5) = 720P HD Resolution
5.
Frame Rate:
Select frame rate of individual camera (1 – 30FPS) Default 25
Higher the frame rate, bigger the file storage size
