Failure to follow these safety warnings could potentially result in an accident, collision resulting in serious injury or death
•
Install the device in a manner that does not obstruct the driver’s view of the front or sides of the vehicle, or interfere with the safety of operating the vehicle.
•
Do not operate, adjust or view this recorder while driving or when vehicle is in motion
•
Do not place the device unsecurly on the dashboard, or place the device in front of or above an airbag
•
Please comply with all driving and traffic regulations
•
To reduce the risk of fire or electric shock, do not expose the DVR to water, liquid, rain or moisture
•
Disconnect the power from the XDR if equipment or wire is exposed to liquid
•
Disconnect and replace the cable if wire is stripped or damaged
•
Disconnect and replace the cable if wire is stripped or damaged
•
When exposed to direct sunlight for a period of time, the equipment may become hot. Please exercise caution when touching the equipment
•
Do not disassemble or alter the equipment, cable or accessories as this may lead to equipment error and failure, thus voiding all warranty
•
In the event of an impact or accident, please check to ensure the equipment is properly secured. Inspect the mounting bracket and screws for any signs of damage
•
Disconnect and replace the cable if wire is stripped or damaged
•
When using the power connection cable, ensure all connections are secured
•
Metallic coating on front window of vehicle may cause interference in GPS signal
•
Use only recommended Micro SD card specifications as it may affect data storage. SDXC Min Class 10 and Up
•
When Power is connected, do not remove the micro SD card as it may cause memory card failure
•
Do not modify the name of file folders in the SD card as it will cause directory and recording issues
5
