Surveillance
– IPC / HD Camera Setup
4.8 Surveillance – PTZ
NOTE:
PTZ settings applicable only for PTZ enabled analog or IP cameras
Setup:
1.
Enable
/ Disable PTZ function in each Channel
2.
Operate
: Serial / N9M, ONVIF.
3.
Protocol Type
: Serial Mode Supports
- N9M
- Onvif
- Pelco D
- Pelco-P PTZ
30
- Pelco-P PTZ
4.
Address
: Applies to Serial mode
5.
Test
: Test PTZ function, select Test to enable On Screen PTZ control
panel
