Alarm
– Base Configuration
42
6.3 Alarm – Video Loss
Enable / Disable
Video loss Alarm
Alarm Type
: Important or General
Trigger
: Channel selection
Channel
: Select channels to detect video loss
Set Period / Schedule
: Create schedule for video loss detection
Channel
: XDR supports multiple cameras to be assigned for recording when
specific alarm is triggered
Post Recording:
Duration of recording to be marked as post alarm event
Lock:
Lock specific alarm recording to keep for specified duration – refer to
section 4.3 General > Surveillance > Record > Lock Duration days 1 – 31 days
3G:
Applicable only for the XDR-580H
Linkage Output:
1 or 2 – Enable link alarm output when alarm is triggered
Output delay Time
: alarm output duration after alarm is removed 0 – 255 secs
Alarm upload:
Enable to upload to platform (Only on XDR-580)
Linkage screen:
Link channel to show full image when alarm is triggered
PB alarm duration:
Available alarm duration after urgent alarm is removed
Alarm snap:
Enable to link image snapshot
Summary of Contents for XDR-1280/D
